Even though, the idea of painting your own rims has been around a couple of years now, a lot of concerns pop up of how to do it and I believed I would share my own experiences with painting my Integra stock rims. I have read up several examples of how to do this, but my 1st time attempting was this year when I chose to refinish my winter rims. I was rather please with the ou...
Paint your personal Rims? Who would have thought anything previously carried out by pros could be completed in your personal property.
Whilst, the concept of painting your personal rims has been about a few years now, several concerns pop up of how to do it and I thought I would share my own experiences with painting my Integra stock rims. I have read up numerous examples of how to do this, but my initial time trying was this year when I chose to refinish my winter rims. I was very please with the outcome.
Initial, what the hell do you want to paint your rims? Paint of course :) This is exactly where Duplicolor comes in with their wheel paint. They offer you paint colors to match your style coming in white, gunmetal, traditional silver and bronze as properly. For other ways to look at the situation, you are asked to gaze at: official site. I chose to do mine in gunmetal leaving my lip the stock polished style look. So here are your possibilities:
So you chose your color, purchased your paint and are semi-prepared. 1st, you want to sand down your rims. Why? This provides the surface a rough texture so the paint has one thing to adhere to. Reference the write-up to polish your rims on how sanding of the rims functions. The only distinction with this is how far you want to go. In my case, becoming winter rims painted I chose not to go by way of the approach of stripping the paint on the rims entirely. I merely sanded down the surface with 300 grit sandpaper ensuring to make every thing sanded equally. In case you require to discover further on cerakote kit, we know of many libraries people should consider pursuing. This provides the rough surface necessary for the paint to adhere, and as lengthy as your rims had no damage it ought to be excellent enough.
Your rims are sanded you have your paint and now are ready. Initial, make sure you clean all sanding dust off the rims and ensure a entirely clean surface so the paint will stick and not flake off immediately after your first drive out with your newly painted rims!!! Right here are my rims washed and prepared to entirely dry just before painting:
My rims are masked off with newspaper and masking tape. Of course you want to do this so you dont turn your tires into the color you are painting. If you wish to get further about sand blast, there are many databases people might investigate. I do not want gunmetal painted tires. Also if you appear close adequate, you will know that the lip has been masked off as well. So I cautiously applied the masking tape on the lip to protect it from getting painted as nicely. Also, you know the little factor you pump your air into, mask that off as well unless you want that to have a color alter as well :)
The rims are dry, you have masked off what you dont want painted and now you are ready. Place some newspaper on the ground and spot the rim on best of the newspaper. You do not want to paint the concrete underneath the rim so hold it clean with the newspaper.
Now apply your first coat of paint. Let the paint dry properly and next day admire your handiwork and final results..Pro-Strip 958 W. 1st Ave. Mesa, AZ 85210 (480)-380-0489